The main technical parameters:
1. Embossing roller material: forged steel
2. The thickness of the pressed material: within 0.6-1.2mm
3. Width of pressed material: 1200mm
4. Speed: 0-10m/min
5. Pattern: as per sample
6. Material to be pressed: copper plate, stainless steel, iron, aluminum
7. Pattern depth: 2-4mm pattern depth is adjustable
8. Embossing roll specification: ø180*1300mm
9. Width of the finished product of the pressed material: ≤1200mm
10. Roll structure: integral forging
11. Heat treatment of rolls: finishing, quenching and tempering of forgings, power frequency quenching of rolls
12. Roll hardness: HRC55-58
13. Roll pattern: according to the drawing requirements, CNC engraving
14. Rolling mill stand: steel plate combined structure
15. Rolling mill drive: adopts frequency conversion speed regulation
16. Embossing method: two-roller concave-convex opposing pressure
17. Pressure regulating method: reducer electric pressure regulating
18. Voltage power: 12 KW (1.5 KW per group, 8 groups in total)
19. Center height (between the ground and the two rollers): 750mm
20. Electric control part: independent control cabinet
21. Between the rolls: the gap can be adjusted
22. Flower roller assembly: fast electric replacement of the flower roller assembly
23. Embossing support roller: outer diameter ø140 (upper and lower each 2pcs, 4pcs in total,
40Cr material, intermediate frequency + grinding + chrome plating)
24. Embossing support wheel: outer diameter ø80 (up and down each 6 sets, 12 sets in total,
40Cr material, intermediate frequency + grinding + chrome plating)
25. Cycloidal pinwheel reducer: XWD96-15
26. Frequency conversion motor power: 15KW/380V(50Hz)
27. The feed is equipped with rubber roller damping
28. Dimension (L x W x H): 3800mm*1200mm*1700mm (take the actual product as the standard)
29. Net Weight: 5000Kg (based on the actual weight)
Technical Specification
| Embossing Roller Size | Φ500mmx1600mm width |
| Embossing Roller Pattern | willow leaf pattern and compass pattern. (can be customized) |
| Pressed plate | ≤3.5mm thick x 1500mm width (Steel plate, stainless steel plate or cold rolling sheet) |
| Embossing Roller Material | Alloy steel solid forging. |
| Embossing Mode | Upper and lower concave-convex rollers opposing pressure. |
| Pressure Adjustment | Turbine worm reducer pressurize |
| Transmission Mode | Universal joint transmission |
| Voltage and Power | 380V/50HZ, 3P; 15KW (speed 0-15m/min.) |
Technological Process:
Feeding--> feeding guide--> embossing (knurling) forming--> plate leveling--> finished products discharging
Embossed sample photos:
About us:
